Hälytin
- Keskustelun aloittaja Johu
- Aloituspäivä
löytyy suomenkieliset pika-ohjeet asennukseen, laitoin sulle meilillä sen. jos joku muu tarttee, niin laittakaa meiliä: petri@motovelhot.fi niin pistetään tulemaan.
Mitäs tässä paremmassa mallissa on eroa tuohon TG 400:n verrattuna ja mistä näitä "luxusmalleja" sitten saa?
Miten tuo TG 400 kertoo että meni päälle, kenties vilkkuja vilauttamalla tai joku ledisysteemi?
Ottaako se signaalin pressun läpi vai joutuuko sen hupun riepimään perkeleellisessä metelissä naapurien kannustaessa?
Kalakukko
New member
Mitäs siitä voisi sanoa...KylläKyllä!!
Käyttökokemuksia noista M+S hälyistä
Rupes kiinnostamaan.
Kiitos jo etukäteen
+helppo asentaa
+löytyy herkkyyssäätö
+ei ole vielä tullut ainakaan turhia hälyjä, joten ei liian herkkä
+hinta kohdillaan
-joskus joutuu menemään pyörän luokse asti, että kake toimii (voi johtua antennin huonosta sijoituksesta)
-voisi olla hieman äänekkäämpi, mutta kyllä se silti päät kääntää
Täältä löytyy kaavio, jos haluat että:
-ledi vilkkuu kojelaudassa merkkinä
-mopo ei lähde käyntiin työntämälläkään (virrat poikki)
-hälyn tullessa vilkut toimii
http://tinyurl.com/33c6j
http://tinyurl.com/2njvx
Kiitos Jounille
Kalakukko
New member
1 vinkasu on ja 2 vinkasua off, toimii pressunkin läpiMiten tuo TG 400 kertoo että meni päälle, kenties vilkkuja vilauttamalla tai joku ledisysteemi?
Ottaako se signaalin pressun läpi vai joutuuko sen hupun riepimään perkeleellisessä metelissä naapurien kannustaessa?
Tässä "ameerikan kielinen ohje
USER'S MANUAL TG 400
A INSTALL THE SYSTEM
Please following the illustration to install, the press black button beside left of the audioalarm
and it will ring long twice meaning the system is installed.
B - BASIC FUNCTIONS OF BUTTONS
1. Anti-thief setting: Press button (A) to set anti-thief system on. And the audio-alarm will
ring once meaning the system is on.
2. Anti-thief setting off : Press button (B) to release all the function and the audio-alarm will
ring short twice.
3. Searching motorcycle: Press button © to search your motorcycle. And the audio-alarm
will ring 6 seconds
4. Audio-alarm length adjusting: Reference step D.
C - SENSITIVITY ADJUSTING :
1. Press button (A) and (B), DO NOT release until you hear audio-alarm ringring long twice.
Then press button (A) again to adjust the sensitivity.
2. Press button (A) to low down 1 degree each time
(circulate adjusting from 1 degree to 8 degrees)
3. When you are adjusted, you will hear audio-alarm once at 1 degree. The audio-alarm will
ring short once when the degree are from 2 to 8 degrees.
4. As long as you have'got the sensitivity you want, press button (B) to make it done.
D AUDIO-ALARM LENGTH ADJUSTING:
1. Press button (A) and (B) DO NOT release until you hear the audio-alarm ringing long
twice. Then press button (D) again to adiust the alarm length,
2. Press button (D) to adjust 2 second shorter of the alarm length each time (30 to 16 seconds
circulate adjusting ).
3. When you are adjusting, you will hear audio-alarm ringing long once at 30 seconds of the
alarm length and the audio-alarm will ring short once when the alarm length are from 29
to 16 seconds.
4. As long as you have got the alarm length you want, press button (B) to make it done.
E - ADJUSTING THE POWER SUPLLY TURN ON/OFF
1. Press button (B) and (D), DO NOT release until you hear audio-alarm ringing long three
times meaning ihe power supply is turned off.
2. When you want return the power supply. Press black button beside left of the audio-alarm,
you will hear the audio-alarm ringing twice meaning the power supply is returned on.
USER'S MANUAL TG 400
A INSTALL THE SYSTEM
Please following the illustration to install, the press black button beside left of the audioalarm
and it will ring long twice meaning the system is installed.
B - BASIC FUNCTIONS OF BUTTONS
1. Anti-thief setting: Press button (A) to set anti-thief system on. And the audio-alarm will
ring once meaning the system is on.
2. Anti-thief setting off : Press button (B) to release all the function and the audio-alarm will
ring short twice.
3. Searching motorcycle: Press button © to search your motorcycle. And the audio-alarm
will ring 6 seconds
4. Audio-alarm length adjusting: Reference step D.
C - SENSITIVITY ADJUSTING :
1. Press button (A) and (B), DO NOT release until you hear audio-alarm ringring long twice.
Then press button (A) again to adjust the sensitivity.
2. Press button (A) to low down 1 degree each time
(circulate adjusting from 1 degree to 8 degrees)
3. When you are adjusted, you will hear audio-alarm once at 1 degree. The audio-alarm will
ring short once when the degree are from 2 to 8 degrees.
4. As long as you have'got the sensitivity you want, press button (B) to make it done.
D AUDIO-ALARM LENGTH ADJUSTING:
1. Press button (A) and (B) DO NOT release until you hear the audio-alarm ringing long
twice. Then press button (D) again to adiust the alarm length,
2. Press button (D) to adjust 2 second shorter of the alarm length each time (30 to 16 seconds
circulate adjusting ).
3. When you are adjusting, you will hear audio-alarm ringing long once at 30 seconds of the
alarm length and the audio-alarm will ring short once when the alarm length are from 29
to 16 seconds.
4. As long as you have got the alarm length you want, press button (B) to make it done.
E - ADJUSTING THE POWER SUPLLY TURN ON/OFF
1. Press button (B) and (D), DO NOT release until you hear audio-alarm ringing long three
times meaning ihe power supply is turned off.
2. When you want return the power supply. Press black button beside left of the audio-alarm,
you will hear the audio-alarm ringing twice meaning the power supply is returned on.
